Loading...

Instructions - Execuhitch

Invisihitch Operating Instructions Inserting the tow ball or accessory adaptor. 1) The key lock should be in the unlocked position. 2) The handle should be in the loaded position. 3) Open the dust cover and insert the accessory into the block about an inch. 4) Make sure you have the accessory aligned properly and lift with force to snap it into place. 5) Once the accessory is snapped into place, push in the lock and the accessory is locked in. Removing the towball or accessory adaptor. 1) Insert key and unlock the hitch receiver 2) Turn the handle in a clockwise direction while holding the accessory. 3) The accessory will drop out when the handle is turned. Make sure you have your hand under the accessory ready to accept it as it is released. Common Mistakes: 1) Inserting the accessory when the spring loaded mechanism is not in the loaded position. You either have to turn the handle partially while inserting the accessory or the handle must be in the loaded position. 2) Attempting to turn the handle to release the accessory and put the handle in the loaded position while the lock is engaged. Make sure your hands are not around the handle while inserting the accessory in place. The handle turns quickly to secure the accessory.